If one trip served two short-term rentals, the time it took is one block of hours, and that block has to be divided between the two properties rather than written into both logs at full value. Four hours on site, two at each house, is four hours of participation across the portfolio — not four hours for the cabin and four for the condo. The division itself is a judgment call, and what makes it defensible is that the method is reasonable, recorded at the time, and used the same way all year.
Why the question comes up at all
Owners with two or more rentals rarely work on them one at a time. You drive out on a Saturday, meet the plumber at the first house, drop linens at the second, pick up supplies that both will use, and drive home. The day felt like a single errand. The log has to turn it into separate per-property entries, because that is the unit the rules operate on.
The temptation is to record the full day against each property. It doubles a weak total without any extra work, and it is the clearest way to make a log unusable. An examiner who sees the same four-hour window logged twice has found a reason to doubt every other entry, including the honest ones.
One hour of your time can support one hour of participation, once. It can be assigned to whichever property it served, or divided between them, but it cannot count twice.
The tests are applied activity by activity
This matters because of how the material participation tests work. IRC §469 and the tests in Treas. Reg. §1.469-5T are applied to an activity, and absent a grouping election each rental property is generally its own activity. Two properties at 70 and 60 hours are two properties that have not met the 100-hour test, not one portfolio at 130 hours. IRS Publication 925 describes the same framework in plainer language.
So the allocation is not bookkeeping tidiness. It decides which total each hour lands in, and totals are what the tests measure. A log that records portfolio hours without saying which property they belonged to may not be usable for either one. We covered that default in more detail in per property or combined.
On-site time is usually easy to split
Time spent physically working at a property belongs to that property, and most of a multi-stop day resolves cleanly:
- 90 minutes turning over the cabin: cabin.
- 45 minutes waiting for and supervising the plumber at the condo: condo.
- 20 minutes photographing the condo's new backsplash for the listing: condo.
Write these as separate entries with their own start and end times, not as one "Saturday property day" entry that you intend to break apart later. The split you make at the end of a month is a reconstruction, and reconstructions carry less weight than a record made while the work was happening. A record made at the time carries weight that a later estimate does not.
Anything genuinely shared — a phone call with the insurance broker about both policies, an hour reconciling both properties' bookings — is the harder case, and it gets the same treatment as travel below.
Travel that serves both properties
Travel is where the honest answer requires a method. Whether travel time counts as participation at all is its own question, and the answer depends on the facts of the trip; does travel time count sets out what the opinions have and have not allowed. Assume for this section that a given trip's drive time is participation in the activity. The question is only which property gets it.
A few patterns, and how owners commonly handle them:
| The trip | Common approach |
|---|---|
| Drive out to one property, work, drive home | All of it to that property |
| Drive out, work at both, drive home | Split the drive; assign each on-site block to its property |
| Drive out for property A, stop at B briefly on the way | Most of the drive to A, with the detour and on-site time to B |
| Supply run for both | Split by what the supplies were for |
For the middle cases, the split has to rest on something. A reasonable basis is one you can state in a sentence: time actually spent at each property, the mileage attributable to each leg, or the number of properties the trip served. Each of those can be defended. What cannot be defended is a number with no basis behind it, or a basis that changes whenever a different split would help a total.
Pick a method, write it down, keep using it
Treas. Reg. §1.469-5T(f)(4) is the provision on proof of participation. It does not require a particular form of record, but it does expect the taxpayer to establish participation by reasonable means, and it specifically says that a post-hoc estimate is not enough on its own. Applied to allocation, that points at three things:
- State the method once, in writing. A line in your records that says "shared travel split by on-site time at each property" is the standard the entries are then measured against.
- Show the basis in the entry. "Round trip 2h 10m, split 60/40 cabin/condo by time on site (78 min / 52 min)" tells a reader where the number came from. "Travel 1h 18m" does not.
- Do not revisit it in December. A method applied all year reads as a method. A method applied to the last quarter, after you saw where the totals landed, reads as arithmetic in service of a result.
Consistency is worth more than precision here. Nobody expects a mileage-weighted allocation to the minute. A plain rule, applied the same way in March and October, is a stronger record than a sophisticated one applied selectively.
What a grouping election changes
If two or more activities are properly grouped into a single activity under Treas. Reg. §1.469-4, participation across the group is tested together, and the allocation between those properties stops affecting whether a test is met. That is a real difference, and it is also an election made on the return, with consequences in later years. We wrote about it in the grouping election; whether it is available and sensible on your facts is a question for your CPA or EA, not something to assume while logging.
Two cautions even if you expect to group. Grouping does not reach back and repair entries that never said which property they served, and it does not merge the average-period-of-customer-use test in Treas. Reg. §1.469-1T(e)(3), which is computed from each property's actual stays. Check that figure for each property separately on your booking platform. Keeping per-property detail costs nothing and leaves every option open.
What to write down
For any trip or task that touched more than one property:
- Separate entries per property, each with its own date, start and end time.
- The property named on every entry. Never an entry whose property field is blank or reads "rentals."
- For shared time, the total, the split, and the one-line basis for the split.
- Who else was there and for how long, since the 100-hour test turns on a comparison with other participants.
- The receipt, invoice or photo attached to the entry it belongs to, so the corroboration travels with the record rather than sitting in a folder.
At year end you want to be able to produce each property's total on its own. STR Tracker's PDF report totals hours by property and shows each entry's property in the detail, which is the view a preparer needs when the question is whether a particular property met a test. A spreadsheet does the same job as long as the property column is never empty and shared time is split rather than duplicated. The audit documentation guide covers what that package should contain.
The underlying discipline is small. Decide how you split shared time, write the basis into the entry while you remember it, and never let one hour appear in two totals.
